Effect of inner wall cracking on the cavitation bubble formation in the mercury spallation target at J-PARC

Ariyoshi, Gen; Saruta, Koichi; Kogawa, Hiroyuki; Futakawa, Masatoshi; Maeno, Koki*; Li, Y.*; Tsutsui, Kihei*

Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.1407 - 1420, 2023/08

https://doi.10.13182/NURETH20-41514

Cavitation damage on a target vessel due to proton beam-induced pressure waves is one of the crucial issues for the pulsed neutron source using a mercury spallation target. As a mitigation technique for the damage, the helium microbubble injection into the mercury has been carried out by using a swirl bubbler in order to utilize compressibility of bubbles. Moreover, double-walled structure, which consists of an outer wall and an inner wall, has been applied as the target head structure. In this study, we aim to develop an abnormality diagnostic technology to detect the inner wall cracking, which is caused by such cavitation damage, from the outside of the target vessel. The mercury flow fields in the case with the cracking are evaluated by computational fluid dynamics analysis based on finite element method. And then, effect of the cracking on the flow field is discussed from the point of view of the flow-induced vibration and the acoustic vibration.

Development of a miniature electromagnet probe for the measurement of local velocity in heavy liquid metals

Ariyoshi, Gen; Obayashi, Hironari; Sasa, Toshinobu

Journal of Nuclear Science and Technology, 59(9), p.1071 - 1088, 2022/09

https://doi.org/10.1080/00223131.2022.2030824

Electromagnetic induction method is one of the effective techniques for local velocity measurement in heavy liquid metals. Ricou and Vives' probe and Von Weissenfluh's probe are famous instrumentations using a permanent magnet. However, sensitivity and measurement volume of the probes show unexpected variation since demagnetization of the magnet is occurred by temperature increase up to the Curie temperature. In this study, electromagnetic probe incorporating a miniature electromagnet was newly developed to overcome such unexpected variation. The diameter and the length of the sensor was 6 mm and 155 mm, respectively. The sensitivity and the measurement volume of the probe were assessed by measurement of local velocity of flowing mercury in a square channel. To clarify the validity for the measured velocity profiles, numerical velocity profiles were calculated and compared with experiment. And the validity for the measured velocity profiles were confirmed by calculated result.

Numerical simulation of annular dispersed flow in simplified subchannel of light water cooled fast reactor RBWR

Yoshida, Hiroyuki; Horiguchi, Naoki; Ono, Ayako; Furuichi, Hajime*; Katono, Kenichi*

Proceedings of 29th International Conference on Nuclear Engineering (ICONE 29) (Internet), 7 Pages, 2022/08

Proposal and application of ROM-Lasso method for sensitivity coefficient evaluation

Katano, Ryota; Yamamoto, Akio*; Endo, Tomohiro*

Proceedings of International Conference on Physics of Reactors 2022 (PHYSOR 2022) (Internet), p.2032 - 2041, 2022/05

https://doi.org/10.13182/PHYSOR22-37557

We have proposed the ROM-Lasso method to perform an efficient evaluation of the sensitivity coefficients of ADS core parameters to cross sections without major modification of the core analysis system. In the ROM-Lasso method, the sensitivity coefficient vector is expanded via the subspace bases so-called Active Subspace (AS), and the effective number of unknowns is reduced. Then, the expansion coefficients are determined via the penalized linear regression with the core parameters obtained by the random sampling, and the sensitivity coefficient vector is estimated. Owing to the AS, the required number of the core calculations is dramatically reduced in the ROM-Lasso method. In this work, we take the sensitivity coefficient evaluation of the coolant void reactivity at the end of the cycle for example and demonstrate how estimation accuracy depends on the number of samples and the AS.

R&D on Accelerator Driven Nuclear Transmutation System (ADS) at J-PARC, 5; Research and developments of a superconducting linac for ADS

Kondo, Yasuhiro; Takei, Hayanori; Yee-Rendon, B.; Tamura, Jun

Purazuma, Kaku Yugo Gakkai-Shi, 98(5), p.222 - 226, 2022/05

A superconducting accelerating cavity is indispensable to realize a driver linac that meets the requirements of ADS. The low-energy section of the accelerators, which is normal conducting one, was redesigned to reflect the recent progress in the development of superconducting accelerator cavities. In addition, we are developing a prototype cavity for the spoke-type cavity that has not been developed well. This section reports on the latest research and development of ADS linacs at the Japan Atomic Energy Agency.

Development of mock-up test loop (IMMORTAL) for LBE spallation target

Obayashi, Hironari; Yamaki, Kenichi*; Yoshimoto, Hidemitsu*; Kita, Satoshi*; Wan, T.*; Sasa, Toshinobu

JAEA-Technology 2021-035, 66 Pages, 2022/03

JAEA-Technology-2021-035.pdf:4.26MB

Construction of Transmutation Experimental Facility (TEF) is under planning in Japan Proton Accelerator Research Complex (J-PARC) program to promote R&Ds on realization of transmutation technology by an accelerator driven system (ADS). As a facility of TEF, ADS Target Test Facility (TEF-T) will provide a spallation target to study target technology and perform post irradiation examination (PIE) of candidate materials of ADS. In ADS, lead-bismuth eutectic (LBE) alloy is used as a spallation target material and a core coolant. As is well known, LBE has corrosive to structural materials hence each component of the target system should provide compatibility with LBE. In addition, instrumentations for LBE are restricted by the target operation condition such as high temperature and irradiation environment. The devices for LBE have been developed individually to achieve the LBE target system. "Integrated Multi-functional MOckup for TEF-T Real-scale TArget Loop, IMMORTAL" was fabricated as a mock-up test loop of the target for the purpose of the integration testing of individually developed devices. This report describes an overview of IMMORTAL and the design of the installed devices.

Correction method of measurement volume effects on time-averaged statistics for laser Doppler velocimetry

Wada, Yuki; Furuichi, Noriyuki*; Tsuji, Yoshiyuki*

European Journal of Mechanics B, Fluids, 91, p.233 - 243, 2022/01

https://doi.org/10.1016/j.euromechflu.2021.10.007

Experimental characterization of high-energy component in extracted pulsed neutrons at the J-PARC spallation neutron source

Harada, Masahide; Teshigawara, Makoto; Oi, Motoki; Oikawa, Kenichi; Takada, Hiroshi; Ikeda, Yujiro

Nuclear Instruments and Methods in Physics Research A, 1000, p.165252_1 - 165252_8, 2021/06

https://doi.org/10.1016/j.nima.2021.165252

This study explores high-energy neutron components of the extracted neutron beam at J-PARC pulsed neutron source using the foil activation method with threshold reactions. Foils of aluminum, gold, bismuth, niobium, and thulium were used to cover the neutron energy range from 0.3 MeV to 79.4 MeV. The experiment was performed using neutron beams of BL10 (NOBORU). The foils were irradiated by a neutron beam at 13.4 m from the moderator. To characterize high-energy neutron fields for irradiation applications, reaction rates in three different configurations with and without BC slit and Pb filter were examined. To compare the experiments with calculations given for the user, reaction rates for corresponding reactions were calculated by the PHITS code with the JENDL-3.2 and the JENDL dosimetry file. Although there was a systematic tendency in C/E (Calculation/Experiment) ratios for different threshold energies, which C/E ratio decreased as threshold energy increased up to 100 MeV, and all C/E ratios were in the range of 1.00.2. This indicated that high-energy neutron calculations were adequate for the analysis of experimental data for NOBORU users.

Behavior of tritium release from a stainless vessel of the mercury target as a spallation neutron source

Kasugai, Yoshimi; Sato, Koichi; Takahashi, Kazutoshi*; Miyamoto, Yukihiro; Kai, Tetsuya; Harada, Masahide; Haga, Katsuhiro; Takada, Hiroshi

JPS Conference Proceedings (Internet), 33, p.011144_1 - 011144_6, 2021/03

https://doi.org/10.7566/JPSCP.33.011144

A spallation neutron source with a mercury target has been in operation at the Materials and Life Science Experimental Facility of J-PARC since 2008. The target vessel made of stainless steel is required to be exchanged periodically due to radiation damage etc. In this presentation, tritium gas release observed in the first series of exchange work in 2011 and the analytical results will be shown.

Research and development of transparent materials for radiation shield using nanoparticles (Contract research); FY2019 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Kyushu University*

JAEA-Review 2020-036, 176 Pages, 2021/01

JAEA-Review-2020-036.pdf:9.55MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2019. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Research and Development of Transparent Materials for Radiation Shield Using Nanoparticles" conducted in FY2019. The present study aims to reduce radiation exposure of workers in debris retrieval/analysis and reduce deterioration of optical and electronic systems in remote cameras. For these purposes, we develop transparent radiation shield by making the shield materials into nanoparticles, and dispersing/solidifying them in epoxy resin. By making boride or heavy metal compounds into nanoparticles, we will also develop a radiation shield that shields both neutrons and gamma-rays, and also suppresses secondary gamma-rays produced from neutrons.